Xerox Phaser 7500N: A Brand New Printer Type

Xerox Phaser 7500The Meeting
Xerox printing machines has developed considerably since it first appeared. Apart from classical laser printing devices, the world has seen solid-ink and LED-machines. The printing quality’s gone up, the devices have become more available, the maintenance’s got easier, but most exciting fact is that along with the increased reliability of printing mechanisms, the ownership cost and cost-per-page have shrunk.

As new printing technologies are introduced, the quality of prints logically changes for the better. Today many manufacturers offer high-quality office color printing devices at reasonable price. And this is no surprise: where home user ignores a slightly higher cartridge price or smaller yield, company office manager chooses different device.

Taking into account the tense competition on the market of office A3 color printers and ever-growing requirements for these devices, Xerox introduced a new model of Phaser series – 7500. A characteristic feature of this model is the Xerox’s new implemented printing technology — HiQ LED.

Simnply put, this is an upgrade of the traditional LED technology credited as solid and cheap alternative to lasers. The idea behind the new technology is to save all the pros of LED technology, which allows LED-printer to be as cheap as lasers, and combine them with laser printing quality. So, a HiQ LED device would cost same money as its LED counterpart, but printing quality would be as high as that of laser printers.

Basic specification of Phaser 7500 are as follows:

  • Maximum resolution of 1200 dpi
  • Printing speed in both color and monochrome is 35 A4 pages per minute
  • PostScript 3 and PCL 6c languages supported

The Built
Generally, the printer of this class all same vey much the same look. The output tray is located at the top. Two input trays: the main and the supplemental. The 7500 model has 4 modifications. The most basic model ends with ‘N’, indicating the device can be connected into network. The other three end with ‘DN’, ‘DT’ and ‘DX’ and are worth a closer examination.

DN is a compromise between the price and the functionality. The only difference from the N model is duplex-printing unit. Since printers like that are usually seen in middle-sized offices, automatic two-sided printing can provide a lot wider possibilities for printing and saving, and the price tag would easily fit the budget.

The remaining two models show more interesting features. DT and DX are equipped with additional input trays (DT can hold up to 100 sheets, while DX has enough trays for 2100 sheets). The senior, DX model is a floor-standing printer that sports an 80 GB hard drive. Wi-Fi adapter is not supported by any of the models, so if you should think of wireless connectivity beforehand.

The printing
An office printer is about speed of printing. If a device does not meet the claimed specification, it won’t be ordered despite all its usability. So, the first test we conducted was the print-out of 10 copies of single-page PDF-file. Expectedly, the monochrome printing speed fully corresponds to info on the site. However, as soon as we moved to printing out a weighty 8-page color presentation, the printing speed dropped down to 33 pages per minute. But one should remember that when it comes to printing documents with graphics, the result may vary depending on the complexity of the document. In general, the eye-catching fact is there’s virtually no delay before the first page is printed.

To assess the printing quality, we used a PDF-template with a bright yellow red flower, a portrait, four color gradients (cyan, magenta, yellow, key color) and a table of typefaces ranging from 12 to 1 point in size. Doubled attention was paid to gradient printing, as a A3 printer of this class is likely to be used for printing high quality graphics.

The quality of gradient reproduction left no doubts; each step was reproduced clearly and flawlessly. The red color in the flower image showed no gradients. Small-sized typefaces were not a problem for this printer, the text remained readable even for 1.5 size. High quality of printing of fine details betrays a really professional device. Printing quality of Phaser 7500 compared to laser color printer of same price level is very much the same, or even better in some cases.

Another important factor of office printer is the duty cycle and cost-per-page. At this point, the manufacturer notes that Xerox Phaser 7500 cartridges are full cartridges, and not the starter edition. If you want more savings, there are higher yield toner cartridges: the black cartridge for 19,800 impressions at 5% average coverage, while color toner cartridges are enough to last 17,800 pages each. This is a really good figure for such toner.

Those who ever stumbled upon the maintenance of performance laser printer know well how much a new fuser or transport belt cost. Often, it costs half a printer to replace all those parts. The Phaser 7500 has the parts duty cycle of 80,000 copies. It’s a good new, taking into account the standard duty cycle of this printer class – 50,000 copies.

The Conclusion
If one was to draw a conclusion for Phaser 7500, he would be very optimistic about this printer. The essentials of a machine like that are quality, speed and cost. Any of these factors is equally important, and the Xerox Phaser 7500 has all the factors accounted.

Shop with Toner Cartridge Depot
Subscribe to our blog to get useful tips and news about the printing industry.
In addition, you will receive a $10 discount on your order.
You have been subscribed, and you will get a $10 discount coupon soon
You are subscribed already